Becker Active 43 Series Operating Instructions Manual Download Page 120

Page: 120 / 142

120

>>>

EXTRAS

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Selecting an image

In the image viewer menu, select the de-
sired folder, and then the desired image.

You can use the

and

buttons to

scroll through the pages of images and
folders.
The selected image is displayed along with
an image menu.

You can use the menu buttons to rotate or
enlarge the image or to display informa-
tion.

Press the buttons to the left and right of
the image to move to the next or previous
image.
Press the centre of the image to hide the
image menu.

Press the right- or left-hand side of the
screen to move to the next or previous im-
age.
Press the centre of the image to show the
image menu again.

Enlarging the image

Show the image menu.

Press the

Zoom

button.

Move the control on the right of the
screen to the desired level of magnifica-
tion.

The image can then be moved around.
Press the centre of the image to cancel the
enlargement.

Rotating the picture

Show the image menu.

Press the

Rotate

button until the image

is in the desired orientation.

Press the centre of the image to hide the
image menu again.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands