Becker Active 43 Series Operating Instructions Manual Download Page 124

Page: 124 / 142

124

>>>

EXTRAS

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Setting the volume

You can set the volume of the MP3 play-
back.

In the playback menu, press the
button.

Press

to increase or de-

crease the volume.

Press

in order to mute the music.

Press

again in order to cancel the

mute function.

Country information

The country information enables you to
display country-specific information for
numerous countries (maximum permitted
speed, alcohol limits, etc.).

Press the

Country information

button.

The list of countries is displayed.

Press the button for the desired country.

The country-specific information is dis-
played (maximum permitted speed, alco-
hol limits, etc.).

Below you will find a description of the
symbols used:

Warning.

Always adjust the volume so that you
can still hear any ambient noise while
driving.

Note:

Please note that the information may not
be complete and other regulations may
apply in the various countries.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands