Becker Active 43 Series Operating Instructions Manual Download Page 87

Page: 87 / 142

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Route calculator (depending on the model)

The route calculator provides a data dis-
play with average speeds, maximum
speeds, etc. and a stopwatch with the op-
tion to record laps.

Call up the options menu for the map
display.

Press the

Trip computer

button.

The data display appears.
The data display contains the following
information:

Current speed (as a number and in
the form of a bar graph)
Maximum speed
Average speed without breaks in the
journey
Average speed with breaks in the jour-
ney
Total distance

Travel time without breaks in the
journey
Travel time with breaks in the jour-
ney
Compass
Calls up the stopwatch with lap re-
cording

Press the

Reset

button to reset the values

to zero.

To display the stopwatch with the lap re-
cording, press the button

in the data

display.

Press the

Start

button to start the re-

cording.

Press the

Lap

button to stop the current

recording and start a new lap recording.

You can record up to 300 laps in the same
way.

Notes:

• The second value displayed in the top

section shows the total time for the laps
driven.

• Pressing the arrow button on the left-

hand side of the display or pressing the

button switches back to the data

display.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands