Becker Active 43 Series Operating Instructions Manual Download Page 72

Page: 72 / 142

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

The Blocked roads button

In the

Blocked roads

settings window you

can unblock previously permanently
blocked roads (See “Blocking route sec-
tions/roads” on page 93.) or modify the
block (time and days of week of block).

Press the

Blocked roads

button in the

settings menu.

A window is displayed containing the
roads that have previously been blocked.

Select the blocked road you want.

Press the

Clear form

button to delete

the road from the list.

Press the

Change

button to modify the

block.

You can now set whether or not the road
should be blocked for each day of the
week.

Press the buttons with the days on
which the road should not be blocked
(the clock symbol under the day disap-
pears).

Confirm your settings by pressing the

button.

Press the

button under one of the

days and set up to two times when the
road should be blocked.

Using the buttons

set the first peri-

od when the road is to be blocked on
this day.

Using the buttons

set the second pe-

riod when the road is to be blocked on
this day if necessary.

Note:

To delete all blocked roads from the list,
press the

Delete all blockings

button fol-

lowed by the

Yes

button in the display

that then appears.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands