Becker Active 43 Series Operating Instructions Manual Download Page 109

Page: 109 / 142

109

TELEPHONE MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Disconnecting a connected telephone

You may disconnect the connection to a
cell phone currently connected via Blue-
tooth.

Press the

Disconnect

button.

The connection to the cell phone current-
ly connected is disconnected.

Telephone calls

In the telephone calls section, you can
find a summary of the control options
that are available for establishing a call, ac-
cepting a call, and ending a call.

Establishing a call

Enter a phone number or select an entry
from the number list or phonebook.

The number is dialed.
If the call is accepted by the party called,
the display changes and you are connected
to the other party.

Accepting a call

For an incoming call, a ringing tone will
sound. Also the following is displayed.

If available, the telephone number and
name of the caller are displayed.
For incoming calls, you have several oper-
ating options:

Selection

Significance

Accept

The call is accepted. The
call screen is displayed.

Reject

The call will be declined.
The caller hears the busy
signal. The screen last ac-
tive is displayed.

Ignore

The ringing tone is
switched off. The screen
last active is displayed.
The call is ended if the
caller hangs up.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands