Becker Active 43 Series Operating Instructions Manual Download Page 129

Page: 129 / 142

129

SETTINGS

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Scrolling

Using the

buttons, it is possi-

ble to scroll through the list in the direc-
tion of the relevant arrow.

Selecting the language

Press the button for the required lan-
guage.

The selection is confirmed by pressing

A prompt appears indicating that the soft-
ware has been re-started, and you are
asked whether you really want to change
the language.

Confirm the prompt using

Yes

Cancelling the language selection

Pressing the

button cancels the lan-

guage selection and shows the settings
menu.

Automatic on/off

The Navigation device can switch auto-
matically to sleep mode when the vehicle
ignition is switched off.
Prerequisite:
• The Navigation device must be con-

nected to the vehicle cigarette lighter
(see also page 18).

• The cigarette lighter is de-energized af-

ter the ignition is switched off.

• The relevant function can be switched

on at the Navigation device.

Switching the function on / off

Press the

Automatic on/off

button.

Depending on the previous setting, the
function will be switched on or off. The
current setting is shown by the icon.

• Top icon: The function is switched on,

the Navigation device switches off auto-
matically.

• Bottom icon: The function is switched

off, the Navigation device does not
switch off automatically.

The following display is shown during au-
tomatic switch-off.

You can cancel the automatic switch-off
procedure by pressing the

Abbrechen

button.

Sounds

You can switch the Navigation device sig-
nal tone on and off. This also includes the
clicking of the touch screen buttons.

Press the

Tones

button.

Depending on the previous setting, the
signal tones are switched on or off.

• Top icon: Tones switched on
• Bottom icon: Tones switched off

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands