Becker Active 43 Series Operating Instructions Manual Download Page 24

Page: 24 / 142

>>>

GENERAL OPERATION

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Switching on

Set the On/Off switch on the underside
of the unit to On.

Press the button on the top of the
Navigation device.

The unit is switched on. The manufactur-
er's logo appears on the touchscreen.

When the Navigation device is started for
the first time, the language selection is
displayed automatically.

Using the

buttons, it is possi-

ble to scroll through the list in the direc-
tion of the relevant arrow.

Press the button for the required
language.

The selection is confirmed by pressing

Then select the desired voice.

A short example announcement is given.

Confirm your selection by pressing the

button.

The following prompt appears shortly
afterwards:

If you agree to the request contained in
this prompt, press the

button.

Note: for models with TTS

Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).

Note:

Use of the Navigation device is only
permitted in accordance with the
national road traffic regulations
applicable at the time.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands