Becker Active 43 Series Operating Instructions Manual Download Page 118

Page: 118 / 142

118

>>>

EXTRAS

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Track repeat / random play

You can set a track to repeat on a loop, or
play the tracks in a random order.

Press the button marked with an arrow
repeatedly until the desired function is
selected.

The icon displayed changes according to
the function selected.
• Icon

functions are turned off

• Icon

random play is selected

• Icon

title repeat is selected

Setting the volume

You can set the volume of the MP3 play-
back.

In the playback menu, press the
button.

Press

to increase or de-

crease the volume.

Press

in order to mute the music.

Press

again in order to cancel the

mute function.

Closing the MP3 player

Pressing the

button closes the MP3

player and displays the media menu.

Warning.

Always adjust the volume so that you
can still hear any ambient noise while
driving.

Note:

Please note that music playback will con-
tinue, despite leaving the playback menu.
Press the pause icon to stop music play-
back. (See “Interrupting playback” on
page 117.)

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands