Becker Active 43 Series Operating Instructions Manual Download Page 57

Page: 57 / 142

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Press

Add stage

to enter further inter-

mediate destinations as described
above.

When you have entered all intermediate
destinations, press the

Done

button.

Give the route a name of your choice.

The stage menu for the new route will be
displayed.

Editing a route

Select the route you wish to edit.

Press the

button in front of the

stage you wish to edit.

The edit menu will be displayed. The fol-
lowing options are available:

Option

Meaning

Show details

The data relating to the

intermediate destination
is displayed. From this
screen, you can display
the intermediate destina-
tion on the map.

Set loading

time

You can define the ex-
pected loading time. De-
fining the loading time is
necessary in order that
the estimated time of ar-
rival is as accurate as pos-
sible.

Move up

The stage is moved for-
wards by one position.

Move down

The stage is moved back-
wards by one position.

Delete stage

The stage is deleted from

the route.

Replace

stage

You can replace the se-
lected stage with another
intermediate destination.

Option

Meaning

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands