23
GENERAL OPERATION
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
On the windscreen
The unit holder can be attached directly
to the windscreen using the suction mech-
anism.
>
Press the carrier plate onto the four re-
taining lugs of the unit holder.
>
Select a suitable spot to attach.
>
Unscrew the fastening screws
and
a little.
>
Press the base
with its suction sur-
face
against the windscreen. Turn
the unit holder such that the carrier
plate is positioned roughly in the de-
sired viewing direction.
>
Press the lever
down.
The holder has attached itself firmly to the
windscreen. It can now be adjusted with
precision. In order to remove it, operate
the lever again.
Adjusting the unit holder’s position
>
Loosen the fastening screws
and
until the carrier plate
can be moved
without using excessive force.
>
Move the carrier plate
to the re-
quired position and hold it in this posi-
tion.
>
Tighten the fastening screws
and
sufficiently so that the Navigation
device is held securely in place when the
vehicle is in motion.
Attaching the Navigation device
>
Position the Navigation device, with
the attachment point on the bottom of
the housing, onto the carrier plate
.
>
Without using excessive force, press the
Navigation device onto the carrier plate
. The Navigation device locks into
place.
Removing the Navigation device
Press the button
on the top of the car-
rier plate
. This unlocks the Navigation
device which can be removed from the
carrier plate.
Switching the Navigation device
on/off
Using the On/Off switch
you can
switch the Navigation device on or off
completely.
Using the button
on the top of the
Navigation device you can place the unit
in sleep mode or switch it on again from
sleep mode.
4
5
2
1
3
3
4
5
6
6
4
5
6
6
7
6
1
2
1
2
