Becker Active 43 Series Operating Instructions Manual Download Page 122

Page: 122 / 142

122

>>>

EXTRAS

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Video player*

The Video Player can show videos saved
on an inserted micro SD memory card or
on the internal memory.
The Navigation device supports the
MPEG4 Part2 video format with the file
extension .avi.

Press the

Movies

button.

A message is displayed stating that the vid-
eo player must not be used when driving.
Please observe this warning.

Confirm the message by pressing the

button.

The selection menu is displayed.
In the selection menu, all the folders on
the memory card containing videos are
displayed.

In the selection menu, select the desired
folder, and then the desired video.

The selected video is played in full-screen
mode.

Note:

The video player cannot be called up
when route guidance is active.
The video player must not be operated
during driving.

*depending on the model, it must be activated via the Content Manager.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands