Becker Active 43 Series Operating Instructions Manual Download Page 115

Page: 115 / 142

115

EXTRAS

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Extras

Under Tools, the following functions are
grouped together, depending on the
model:
• MP3 player*
• Picture viewer*
• Video player*
• Country information
The extras menu is called up from the
main menu.

In the main menu, press

Extras

This displays the extras menu.

Select the desired function by pressing
one of the buttons.

MP3 player*

The MP3 Player can play MP3 tracks
saved on an inserted micro SD memory
card or on the internal memory.

Press the

Music

button.

If a track is already playing, the playback
menu is displayed immediately.
If no track is playing, the selection menu
is displayed.

Selecting a track

Tracks can be selected from the selection
menu.

In the selection menu, you have 6 ways of
selecting tracks.

•

Artists

When you select

Artists

the tracks on

the memory card are listed sorted by
artist.

Note:

In order to select tracks using the catego-
ries

Artists

Genres

and

Albums

, the

MP3 files should have ID3 tags.
Titles can only be selected using the

Playlists

category if there are playlists on

the memory card.

*depending on the model, it must be activated via the Content Manager.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands