Becker Active 43 Series Operating Instructions Manual Download Page 70

Page: 70 / 142

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

•

Volume

You can select the standard volume for
voice announcements for each start of
the Navigation device, or switch off
voice announcements completely.

•

Announce streets (available for

devices with TTS function only)

Using the

Announce streets

button

you can switch the announcement of
the names of streets into which you are
to turn on (

) or off (

•

Announce ETA

Using the

Announce ETA

button you

can switch the automatic announce-
ment of the estimated time of arrival on
(

) or off (

The Voice button

In the

Voice

settings window you can set

the voice that will make the navigation an-
nouncements for the language that has
been set.

Press

Voice

in the settings menu.

The

Voice

settings window appears.

Select the desired voice.

A short example announcement is given.

Confirm your selection by pressing the

button.

The Volume button

With the

Volume

settings window, you

can set the standard volume for voice an-
nouncements for each start of the Naviga-
tion device, or switch off voice announce-
ments completely. Depending on the
situation, this setting can be fitted into the
map display.

Press

Volume

in the settings menu.

The

Volume

settings window appears.

Select the desired volume using the

and

buttons.

Press the

button to switch off the

voice output completely.

Confirm your settings by pressing the

button.

Note:

This function is not available for all
languages/voices. If the function is not
available, the button cannot be selected.

Note:

Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands