B&R Automation PC 810, User Manual

Page: 29 / 428

Technical data • Fully assembled device
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28 29
2.2 Humidity specifications
The following table displays the minimum and maximum relative humidity values for the individual components that
are relevant for the humidity limitations of a fully assembled device. The lowest and highest common values are
always used when establishing these limits.
Component Operation Storage / Transport
CPU boards GM45 COM Express 10 to 90% 5 to 95%
System units (all models) 5 to 90% 5 to 95%
Main memory for CPU boards 10 to 90% 5 to 95%
5AC801.HDDI-00 5 to 90% 5 to 95%
5AC801.HDDI-02 8 to 80% 5 to 95%
5AC801.HDDI-03 5 to 95% 5 to 95%
5AC801.HDDI-04 5 to 95% 5 to 95%
5AC801.SSDI-00 5 to 95% 5 to 95%
5AC801.SSDI-01 5 to 95% 5 to 95%
5AC801.SSDI-02 5 to 95% 5 to 95%
Slide-in compact drives
5AC801.SSDI-03 8 to 95% 8 to 95%
5AC801.HDDS-00 5 to 90% 5 to 90%
5AC801.DVDS-00 8 to 90% 5 to 95% Slide-in drives
5AC801.DVRS-00 8 to 90% 5 to 95%
5AC600.CANI-00 5 to 90% 5 to 95%
5AC600.485I-00 5 to 90% 5 to 95%
5AC801.SDL0-00 5 to 90% 5 to 95%
5AC801.RDYR-00 5 to 90% 5 to 95%
5ACPCI.RAIC-03 (24 hours / standard) 8 to 90% 5 to 95%
5ACPCI.RAIC-04 (24 hours / standard) 8 to 90% 5 to 95%
5ACPCI.RAIC-05 (24 hours / standard) 5 to 95% 5 to 95%
5ACPCI.RAIC-06 (24 hours / standard) 5 to 95% 5 to 95%
5MMHDD.0250-00 (24 hours / standard) 5 to 95% 5 to 95%
Additional insert cards
Interfaces
AP Link
5MMHDD.0500-00 (24 hours / standard) 5 to 95% 5 to 95%
5CFCRD.xxxx-06 CompactFlash cards 85% 85%
5CFCRD.xxxx-04 CompactFlash cards 85% 85%
5CFCRD.xxxx-03 CompactFlash cards 8 to 95% 8 to 95%
Flash drive 5MMUSB.2048-xx 10 to 90% 5 to 90%
Accessories
5MD900.USB2-01 USB media drive 20 to 80% 5 to 90%
Table 7: Overview of humidity specifications for individual components
The specifications listed correspond to the relative humidity at an ambient temperature of 30°C. More detailed
information about specific temperature-dependent humidity values can be found in the technical data for the indi-
vidual components.