Software • B&R Automation Device Interface (ADI) - Control Center
Chapter 4 Software
Automation PC 810 with GM45 CPU board user's manual V1.28
279
The displayed values are updated automatically.
Information:
The status "reversed battery polarity" is only displayed in UPS firmware Version 1.08 or higher.
In UPS firmware Version 1.07 or smaller, a change between battery operation and normal operation
can lead to communication errors.
3. Select UPS monitor to display UPS status changes since the last time the system or UPS driver was started.
Figure 151: ADI Control Center - UPS monitor
The dialog box is updated automatically when the status changes.
To remove a status from the list, click on
Delete
.
Information:
The current status of the UPS is also displayed when the UPS service is started in the Windows Control
Panel on the UPS page in the energy options.
Information:
In a German version of Windows XP Professional the battery status is displayed as "low" in the energy
options, even if the battery is OK (Windows error). In an English version, three battery status levels
are displayed: unknown, OK, replace A low battery status is never displayed.
9.4.3 Changing UPS battery settings
1. Open the
Control Center
in the
Control Panel
.
2. Select the
UPS
tab.
3. Under
Battery settings
, click on
Edit
. This opens the "Open" dialog box.
4. Select and
open
the file containing the battery settings.
