Technical data • Fully assembled device
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
59
2.6.15 Power button
The power button provides a wide range of ATX power supply functions.
Power button
The power button can be pressed with a pointed object (e.g. paper clip or tip of a pen).
The power button acts like the on/off switch on a normal desktop PC with an ATX pow-
er supply:
Press and release
... Switches on the APC810 or shuts down the operating system
and switches off the APC810
Press and hold
... ATX power supply switches off without shutting down the APC810
(
data could be lost!
)
Pressing the power button does not reset the MTCX processor.
Table 31: Power button
2.6.16 Reset button
Information:
From MTCX PX32 firmware ≥ V00.11 and higher, the reset button is only triggered by edges. This means
that the device boots even when the reset button is pressed. In MTCX PX32 firmware < V00.11, the
system does not start after holding down (~ 10 seconds) and releasing the reset button.
Reset button
The reset button can be pressed with a pointed object (e.g. paper clip or tip of a pen).
Pushing the reset button triggers a hardware and PCI reset. The APC810 is restarted
(cold restart).
Pressing the reset button does not reset the MTCX processor.
Table 32: Reset button
Warning!
A system reset can result in lost data!
