Technical data • Fully assembled device
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
51
2.6.5 Ethernet 1 (ETH1)
This Ethernet controller is integrated in the CPU board and connected to external devices via the system unit.
Ethernet 1 connection (ETH1
1)
)
Controller
Intel 82567
Cabling
S/STP (Cat 5e)
Transfer rate
10/100/1000 Mbit/s
2)
Cable length
Max. 100 m (min. Cat 5e)
Speed LED
On
Off
Green
100 Mbit/s
10 Mbit/s
3)
Orange
1000 Mbit/s
-
Link LED
On
Off
Orange
Link (Ethernet network
connection available)
Activity (blinking - da-
ta transfer in progress)
1
Speed LED
Link LED
Table 21: Ethernet connection (ETH1)
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Switching takes place automatically.
3)
The 10 Mbit/s transfer speed / connection only exists if the Link LED is also lit at the same time.
Driver support
A special driver is required in order to operate the Realtek 82567 Ethernet controller. Drivers for approved operating
systems are available in the Downloads section of the B&R website (
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
