B&R Automation PC 810 User Manual Download

Page: 22 / 428

Technical data • Introduction

Automation PC 810 with GM45 CPU board user's manual V1.28

Chapter 2 • Technical data

1 Introduction

The APC810 is a logical step forward from the successful APC620 product series. Based on the latest Intel®

Core™2 Duo technology, the APC810 offers the highest level of performance for any application that requires

maximum computing power.
The APC810 saves space in the control cabinet. Drive inserts (DVD, HDD) and two CompactFlash slots are pro-

tected behind a cover on the front of the device (only one CF slot can be used with the GM45 CPU board). Modular

plug-in technology makes it easy for the user to replace drives. All connections and interfaces are located on the

top side of the housing. The installation depth is not increased by protruding connectors. The different APC810

sizes with one, two, three or five card slots (for PCI / PCI Express cards) provide the optimum design for every

type of installation – a perfect fit without wasting valuable space in the control cabinet.

Summary of Contents for Automation PC 810













































































































































































































































































































































































































































Search results

Summary of Contents for Automation PC 810

Reviews:

Related manuals for Automation PC 810

Brands by name

Popular brands

B&R Automation PC 810, User Manual

Search results

Summary of Contents for Automation PC 810

Reviews:

Related manuals for Automation PC 810

Brands by name

Popular brands