Technical data • Fully assembled device
Chapter 2
Technical data
Automation PC 810 with GM45 CPU board user's manual V1.28
53
2.6.7 USB interfaces (USB1, 2, 3, 4, 5)
The APC810 features a USB 2.0 (Universal Serial Bus) host controller with multiple USB ports, 5 of which are
accessible externally for easy user access.
Warning!
Peripheral USB devices can be connected to these USB ports. Due to the vast number of USB devices
available on the market, B&R cannot guarantee their performance. B&R does ensure the performance
of all USB devices that they provide.
Information:
For more information see Chapter 3 "Commissioning", section "Connecting peripheral USB devices"
Caution!
Because this interface is designed according to general PC specifications, extreme care should be
exercised with regard to EMC, cable routing, etc.
USB1,2,3,4
Universal Serial Bus (USB1, USB2, USB3, USB4
1)
)
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Current load
2)
USB1, USB3
USB2, USB4
Max. 1 A
Max. 500 mA
Cable length
Max. 5 m (without hub)
4 x USB type A, female
Table 23: USB1, USB2, USB3 and USB4 connections
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Each USB port is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 500 mA or 1 A).
USB5
Universal Serial Bus (USB5)
1)
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s), high speed (480 Mbit/s)
Power supply
2)
USB5
Max. 1 A
Cable length
Max. 5 m (without hub)
1 x USB type A, female
Table 24: USB5 connection
1)
The interfaces, etc. available on the device or module have been numbered as such for easy identification. This numbering may differ from that used by
the particular operating system.
2)
Each USB port is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 1 A).
