Technical data • Individual components
110
Automation PC 810 with GM45 CPU board user's manual V1.28
3.6.5 5AC801.SSDI-00
3.6.5.1 General information
This 32 GB slide-in compact SSD (Solid State Drive) drive can be used in APC810 and PPC800 system units.
SSD is based on Single Level Cell (SLC) technology.
When used in an APC810
Information:
The slide-in compact SSD cannot be used in the 5 card slot version of the APC810 in slide-in slot 2
with the 5AC801.ADAS-00 adapter.
When inserted in the slide-in compact slot, the slide-in compact drive is referred to internally as SATA.
3.6.5.2 Order data
Model number
Short description
Figure
Drives
5AC801.SSDI-00
32 GB SATA SSD (SLC), Slide-in compact
Table 65: 5AC801.SSDI-00 - Order data
3.6.5.3 Technical data
Caution!
A sudden loss of power may result in data loss! In very rare cases, mass memory may also be damaged.
To prevent damage and loss of data, the use of a UPS device is recommended.
Information:
The following characteristics, features, and limit values only apply to this individual component and
can deviate from those specified for the entire device. For the entire device in which this individual
component is used, refer to the data given specifically for the entire device.
Product ID
5AC801.SSDI-00
General information
Certification
CE
Yes
cULus
Yes
GL
Yes
Solid state drive
Capacity
32 GB
Data reliability
< 1 unrecoverable error in 10
15
bit read accesses
MTBF
2,000,000 hours
Power on/off cycles
50000
S.M.A.R.T. support
Yes
Interface
SATA
Maintenance
None
Continuous reading
Max. 250 MB/s
Continuous writing
Max. 170 MB/s
IOPS
1)
4k read
35,000
4k write
3,300
Table 66: 5AC801.SSDI-00 - Technical data
