Software • BIOS options
Chapter 4 Software
Automation PC 810 with GM45 CPU board user's manual V1.28
237
BIOS setting
Description
Configuration options
Effect
Base I/O address
Selection of the base I/O address for the hard-
ware security interface.
278, 378, 3BC
Selection of the base I/O address for the parallel
port.
Enabled
Enables the controller
ETH2 LAN controller
Option for turning the onboard LAN controller
(ETH2) on and off
Disabled
Disables the controller
ETH2 MAC address
Displays the Ethernet 2 controller MAC address.
None
-
Table 195: GM45 Legacy Devices (Setting options)
1.5 Boot
Figure 131: GM45 Boot Menu
BIOS setting
Description
Configuration options
Effect
Device based
Only lists devices that are recognized by the
system. The order of devices in this list can be
changed.
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
Boot priority selection
Option for determining the method for how drives
should be booted
Type based
The boot sequence of a device type list can be
changed. It is also possible to add device types
that are not connected to this list.
Information:
It is only possible to use either "Device
based" or "Type based". Using both to-
gether is not permitted.
Table 196: GM45 Boot Menu (Setting options)
