Software • B&R Automation Device Interface (ADI) - Control Center
Chapter 4 Software
Automation PC 810 with GM45 CPU board user's manual V1.28
275
9 B&R Automation Device Interface (ADI) - Control Center
The ADI (Automation Device Interface) enables access to specific functions on B&R devices. Settings for devices
can be read and configured using the B&R Control Center applet in the Control Panel.
Figure 148: ADI Control Center screenshots - Examples
Information:
The temperature and voltage values (e.g. CPU temperature, core voltage, battery voltage) displayed in
the corresponding ADI window represent uncalibrated values for informational purposes. They cannot
be used to draw any conclusions about hardware alarms or error conditions. The hardware compo-
nents used have automatic diagnostic functions that can be applied in the event of error.
9.1 Functions
Information:
The functions provided by the Automation Device Interface (ADI) - Control Center vary according to
the device series.
•
Changing display-specific parameters
•
Reading device-specific keys
•
Updating the key configuration
•
Enabling device-specific LEDs on a membrane keypad
•
Reading and calibrating input devices (e.g. key switches, handwheels, joysticks, potentiometers)
•
Reading temperatures, fan speeds, statistical data and switch settings
•
Read the operating hours (power on hours)
•
Reading user and factory settings
•
Reading software versions
•
Updating and backing up BIOS and firmware
•
Creating reports about the current system (support assistance)
•
Setting the SDL equalizer value when adjusting SDL cables
•
Changing the user serial ID
