Bandai Namco MACH STORM Operation Manual Download Page 205 | Manualshive

Page: 205 / 218

background image

MICROSOFT SOFTWARE LICENSE TERMS
WINDOWS EMBEDDED STANDARD 7

These license terms are an agreement between you and NAMCO BANDAI Games Inc.("NBGI"). Please

read them. They apply to the software included on this device. The software also includes any separate

media on which you received the software.

The software on this device includes software licensed from Microsoft Corporation or its affiliate.

The terms also apply to any Microsoft

• updates,

• supplements,

• Internet-based services, and

• support services

for this software, unless other terms accompany those items. If so, those terms apply.

If you obtain updates or supplements directly from Microsoft, then Microsoft, and not NBGI, licenses those

to you.

As described below, using the software also operates as your consent to the transmission of

certain computer information for Internet-based services.
By using the software, you accept these terms. If you do not accept them, do not use the software.

Instead, contact NBGI to determine its return policy for a refund or credit.
If you comply with these license terms, you have the rights below.

1. USE RIGHTS

Use.

The software license is permanently assigned to the device with which you acquired the software.

You may use the software on the device.

2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS

a. Specific Use.

NBGI designed the device for a specific use. You may only use the software for that

use.

b. Other Software.

You may use other programs with the software as long as the other programs

• directly supports the manufacturer’s specific use for the device, or

• provide system utilities, resource management, or anti-virus or similar protection.

• Software that provides consumer or business tasks or processes may not be run on the

device. This includes email, word processing, spreadsheet, database, scheduling and

personal finance software. The device may use terminal services protocols to access such

software running on a server.

c. Device Connections.

You may not use the software as server software. In other words, more than

one device may not access, display, run, share or use the software at the same time.

You may use terminal services protocols to connect the device to a server running business task or

processes software such as email, word processing, scheduling or spreadsheets.

You may allow up to ten other devices to access the software to use

• File Services,

• Print Services,

• Internet Information Services, and

• Internet Connection Sharing and Telephony Services.

The ten connection limit applies to devices that access the software indirectly through “multiplexing” or

other software or hardware that pools connections. You may use unlimited inbound connections at any

time via TCP/IP.

«
...
203
204
205
206
207
...
»

Summary of Contents for MACH STORM



























































































































































































































Reviews:

No comments

Related manuals for MACH STORM

Mariocart Arcade GP DX

Brand: Bandai Namco Pages: 138

Brand: Sega Pages: 17

Brand: aidapt Pages: 6

Yo Gabba Gabba! PARTY IN MY TUMMY

Brand: Fundex Games Pages: 4

Brand: Fundex Games Pages: 1

Brand: Fundex Games Pages: 2

Brand: Fundex Games Pages: 2

Brand: LAPPSET Pages: 24

Space Invaders 402-1

Brand: Excalibur Pages: 5

Brand: Excalibur Pages: 11

Brand: Excalibur Pages: 13

Brand: VTech Pages: 12

Professional Arcade Fun & Brains

Brand: Bally Pages: 20

Brand: Unicorn Pages: 20

Brand: Sony Pages: 80

Brand: Sony Pages: 52

Brand: Ouya Pages: 7

BIG SCREEN SUDOKU 76042

Brand: Radica Games Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands