– Must be performed by a technician –
– Must be performed by a technician –
160
8B. Service
(2) How to Operate the Remote Controller
z
z
The remote controller may not operate when the remote control photosensor is
directly exposed to bright light such as sunlight or fluorescent light.
z
z
Do not drop or subject the remote controller to impact.
z
z
Do not leave the remote controller in hot or humid locations.
z
z
Do not expose the remote controller to water or place wet objects on the remote
controller.
z
z
Do not disassemble the remote controller.
z
z
In rare cases, remote controller operations may not be accepted easily depending
on the location of use or surrounding conditions. In these cases point the remote
controller directly at the projector unit and perform the operation again.
Open the projector cover and front lid of the projector assembly (see “8A-1-1 (5) Installing the
Projector Unit” on page 64), point the remote controller at the remote control photosensor of the
projector unit and operate the remote controller.
Remote control photosensor
Front lid
Remote controller effective operating range
Approx. 30° to the right and left, 20° up and
10° down or less
Distance: within approx. 5 m
