26
7. Operation
7-1-2 Function Inspection (After Power On)
Inspect the following points after turning on the power switch. If you discover an abnormality, turn off the power
switch immediately to stop operations.
Then, disconnect the power cord plug from the outlet and contact your distributor.
•
Is any part of the power cord or plug abnormally hot?
•
Does touching the machine give a tingling electric shock?
•
Is there a burning smell, abnormal noise or vibration?
•
Is there any other abnormality or malfunction?
•
Check the operation of each button (is there an ON/OFF response?), analog interface (is the input range
normal?) and other input devices. (See “7-4-4 (2) SWITCH TEST” on page 37.)
• Check the audio. (Is sound produced by each speaker?) (See “7-4-6 SOUND TEST” on page 42.)
•
Set the cabinet volume within the range that allows the player to hear alarms and warning announcements
within the operating facility.
• Check that the various lights light up. (See “7-4-4 (3) OUTPUT TEST” on page 38.)
•
Check the displayed images. (Are images projected correctly from the projector?)
• Is the screen blank and the back lamp lit up red? (See “7-7 Projector Lamp (Lamp Unit) Life” on page 54.)
To inspect the following points, press the Service switch and actually play the game.
•
Check the operation of each control device (levers, machine gun button, missile button). (Can the player’s
aircraft be controlled properly?)
