– Must be performed by a technician –
– Must be performed by a technician –
124
8B. Service
(16) Replacing the Throttle Lever Analog Interface – Must be performed by a technician –
z
z
In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
Turn off the power switch. (See “8A-2-3 Turning the Power Switch On” on page 77.)
Remove the throttle lever assembly. (See “8B-5-1 (15) Replacing the Throttle Lever Assembly”
on page 123.)
Loosen the double point (M4 x 6) and remove the analog interface together with the analog
interface bracket.
Analog interface
Analog interface bracket
Double point (M4 x 6)
Remove the analog interface from the analog interface bracket.
Analog interface terminal 1
wiring color: White and red
Analog interface terminal 2
wiring color: White and blue
Analog interface terminal 3
wiring color: White and black
1
2
3
White and red
Heat-shrinkable
tube
Throttle lever analog interface
White and blue
White and black
Analog interface
Analog interface bracket
Spring washer Hexagonal nut (Do not over-tighten)
Washer
Replace the analog interface.
