Bandai Namco MACH STORM Operation Manual Download Page 47

Page: 47 / 218

7. Operation

Operation

Test Mode

Troubleshooting

Test Mode

Troubleshooting

7-4-8 Other Options (OTHERS)

This screen is used to initialize various settings.

In the MENU screen, select OTHERS and press the Enter switch. The OTHERS screen

appears.

Flip the Select switch up or down to select the item to be changed. The selected item blinks.

OTHERS

[DEFAULT IN GREEN]
ROM DAC100-2-NA-MPRO-A01

(2013-09-30 16:49:22)

CLOCK 04/Oct/2013 FRI 11:24:33 (UTC)

S/N 271611-100001

LANGUAGE

ENG

MAINTENANCE TIME SETTING

CLOCK SETTING

BACKUP MEMORY INITIALIZE

EXIT

SELECT SW:CHOOSE ENTER SW:ENTER

OTHERS screen

(a)

(b)

(c)

(d)

(e)

(f)

(g)

Item

Description

(a) ROM

Displays the version of the program on the hard disc.

(b) CLOCK

Displays the clock.

Displays the serial number of the software.

(d)

LANGUAGE

Used to select the language.

(e)

MAINTENANCE TIME SETTING

Sets the maintenance time for automatically restarting the game PC

board.

(f)

CLOCK SETTING

Used to set the clock.

(g)

BACKUP MEMORY INITIALIZE

Deletes the various settings.

(YES: Execute initialization, NO: Cancel initialization)

* This setting is available only when using the offline version of the software.

Press the Enter switch to enter the selected item.

Select EXIT and press the Enter switch to return to the MENU screen.

Summary of Contents for MACH STORM



























































































































































































































Search results

Summary of Contents for MACH STORM

Reviews:

Related manuals for MACH STORM

Brands by name

Popular brands

Bandai Namco MACH STORM, Operation Manual

Search results

Summary of Contents for MACH STORM

Reviews:

Related manuals for MACH STORM

Brands by name

Popular brands