– Must be performed by a technician –
– Must be performed by a technician –
136
8B. Service
(22) Replacing the POP Light – Must be performed by a technician –
z
z
In order to avoid electric shock, accident or injury to yourself or others as well as damage to the
electronic circuits, be sure to turn off the power switch before starting this task.
z
z
Removing the POP light assembly requires standing at an elevated height. Prepare an appropriate
footstool and be careful when working. Working in an unnatural body posture may result in injury
or machine damage.
Turn off the power switch. (See “8A-2-3 Turning the Power Switch On” on page 77.)
Remove the three Torx bolts (silver) (M5 x 12) and remove the POP light cover.
POP light cover
Torx bolt (silver)
(M5 x 12)
Replace the LED lights.
* The LED lights are hot immediately after the power switch is turned off. Although the LED
lights are not hot enough to cause burns, be careful when replacing the LED lights. If
possible, allow the LED lights to cool for 10 minutes before performing this task.
LED light
z
z
When installing the LED lights, be sure to carefully align the socket and pin positions
and insert the LED lights securely. (The lights do not have a polarity.)
To install, perform the procedure in reverse.
