manualshive.com logo in svg

Bandai Namco MACH STORM, Operation Manual

Bandai Namco MACH STORM Operation Manual is a comprehensive guide that provides step-by-step instructions and vital information on operating this thrilling arcade flight game. Download this essential manual for free from manualshive.com and discover how to navigate the skies and engage in adrenaline-pumping dogfights.

Share
Download
background image

– Must be performed by a technician –

– Must be performed by a technician –

103

Service

8B. Service

Test Mode

Troubleshooting

(6)   Replacing and Installing the Control Lever Assembly – Must be performed by a technician –

z

z

In order to avoid electric shock, accident or injury to yourself or others as well as damage to the 
electronic circuits, be sure to turn off the power switch before starting this task.

  Turn off the power switch. (See “8A-2-3 Turning the Power Switch On” on page 77.)

  Remove the four Torx bolts (black) (M5 x 12) and lift up the control lever assembly.

  Disconnect the connector and replace the control lever assembly.

Torx bolt (M5 x 12)

Control lever assembly

Connector

Control lever assembly

Throttle lever assembly

  To install, perform the procedure in reverse.

z

z

When installing, check the connector orientations and insert the connectors firmly 

until they lock securely.

z

z

When installing, be careful not to pinch the connectors and harness.

z

z

After replacement, be sure to perform initialization. (See “7-4-4 (1) I/F CALIBRATION” 
on page 36.)

Summary of Contents for MACH STORM



























































































































































































































Reviews:

No comments

Related manuals for MACH STORM

TDK UFC-ULTIMATE FIGHTING CHAMPIONSHIP-TAPOUT 2 Manual preview
UFC-ULTIMATE FIGHTING CHAMPIONSHIP-TAPOUT 2
Brand: TDK Pages: 16
E-Jet 10 in 1 Multi-Game Table Assembly Instructions Manual preview
10 in 1 Multi-Game Table
Brand: E-Jet Pages: 17
Carmelli Dynasty NG4033F Assembly Instructions Manual preview
Dynasty NG4033F
Brand: Carmelli Pages: 16
Blue Wave NG1201 Assembly Instructions Manual preview
NG1201
Brand: Blue Wave Pages: 9
VTech V.FLASH Instruction Manual preview
V.FLASH
Brand: VTech Pages: 4
VTech Doubleteam User Manual preview
Doubleteam
Brand: VTech Pages: 27
Radica Games LEGENDS OF THE LAKE 74D03 Instruction Manual preview
LEGENDS OF THE LAKE 74D03
Brand: Radica Games Pages: 2
Radica Games BIG SCREEN SUDOKU 76042 Instruction Manual preview
BIG SCREEN SUDOKU 76042
Brand: Radica Games Pages: 2
Hasbro Quiz Wiz Keychain Game 65-156 Instruction Manual preview
Quiz Wiz Keychain Game 65-156
Brand: Hasbro Pages: 2
Hasbro Pooh Learning Theater 87-021 Instruction Manual preview
Pooh Learning Theater 87-021
Brand: Hasbro Pages: 2
Coopers of Stortford K698 Instructions For Use Manual preview
K698
Brand: Coopers of Stortford Pages: 34
LEGO CREATOR 31013 Instructions Manual preview
CREATOR 31013
Brand: LEGO Pages: 32
Diamond Multimedia GameCaster GC2000 Manual preview
GameCaster GC2000
Brand: Diamond Multimedia Pages: 4
Diamond Multimedia 1080 HD Game Capture Installation Manual preview
1080 HD Game Capture
Brand: Diamond Multimedia Pages: 4
Tailgating Sports BUCKETBALL Quick Start Manual preview
BUCKETBALL
Brand: Tailgating Sports Pages: 2

Brands by name

Popular brands

Load more brands