– Must be performed by a technician –
– Must be performed by a technician –
155
Service
8B. Service
Test Mode
Troubleshooting
8B-6-2 Adjusting the Projector Position
– Must be performed by a technician –
Turn on the power switch.
After the title screen appears, enter Test mode, select the MONITOR TEST item and display
the VIEW ANGLE ADJUST PATTERN screen. (See “7-4-5 Projector Test (MONITOR TEST)”
on page 41)
Adjust the vertical and lateral positions and viewing angle of the projector as described on
the following pages so that the white lines on the right and left edges of the VIEW ANGLE
ADJUST PATTERN display screen are located at the edges of the dome screen as shown in
the figure below.
Screen
Approximate adjustment method
Screen
Screen
Screen
Projected lines
Square pipe
Page 157
“(2) Lateral Adjustment”
Page 158
“(3) Viewing Angle Adjustment”
Page 156
“(1) Vertical Adjustment”