www.baldormotion.com
Mint Keyword Summary C-1
MN1901
C.1 Introduction
The following table summarizes the Mint keywords supported by the MintDrive
II
. Note that due
to continuous developments of the MintDrive
II
and the Mint language, this list is subject to
change. Check the latest Mint help file for a complete list of new keywords, changed
keywords, and those used for controlling program flow.
C.1.1 Keyword listing
Keyword
Description
ABORT
To abort motion on all axes.
ABORTMODE
To control the default action taken in the event of an
abort.
ABSENCODER
To read the current EnDat or Hiperface encoder
position.
ABSENCODERMODE
To compensate for abnormal Hiperface encoder wiring.
ABSENCODEROFFSET
To set the zero point for an EnDat or Hiperface encoder.
ACCEL
To define the acceleration rate of an axis.
ACCELDEMAND
To read the instantaneous demand acceleration.
ACCELTIME
To define the acceleration rate of an axis.
ACCELTIMEMAX
To define the acceleration rate of an axis.
ACTIVERS485NODE
Enables the transmitter on a controller’s RS485 port.
ADC
To read an analog input value.
ADCDEADBAND
To set the deadband to be applied to an ADC input.
ADCDEADBANDHYSTERESIS
To set a hysteresis level for entering and leaving the
deadband on the ADC inputs.
ADCDEADBANDOFFSET
To set the deadband offset to be applied to an ADC
input.
ADCERROR
To read back the analog inputs currently in error.
ADCERRORMODE
Controls the default action taken in the event of an ADC
limit being exceeded on an associated channel.
ADCGAIN
To set the gain to be applied to an ADC input.
C
Mint Keyword Summary
C
Summary of Contents for MDH1A05TB-RC23
