Baldor MDH1A05TB-RC23, Installation Manual

Page: 11 / 166

www.baldormotion.com
Introduction 2-1 MN1901
2.1 MintDrive
II
features
The MintDrive
II
combines a powerful fully featured motion controller and brushless servo
control into a compact package. This provides a flexible and powerful motion control solution
for single axis rotary and linear positioning systems. Programmable in Mint, applications can
be quickly written and tested. Standard features include:
H
Single axis AC brushless drive with integrated Mint controller
H
Wide range of models with continuous current ratings from 2.5A to 27.5A
H
Direct connection to 115VAC or 230VAC single-phase or 230-460VAC three-phase
supplies (model dependent)
H
Resolver, encoder, EnDat or Hiperface feedback
H
Programmable in Mint, with multi-tasking capability
H
Position, velocity and current control, preset and point to point moves, software cams and
gearing
H
Auto-tuning wizard (including position loop) and software oscilloscope facilities
H
8 optically isolated digital inputs
H
3 optically isolated digital outputs
H
2 general-purpose analog inputs (can be used as a speed or torque demand reference)
H
2 general-purpose analog outputs
H
1 control relay
H
Selectable RS232 or RS485 communications
H
Flash memory for program storage (128k)
H
Non-volatile RAM.
Factory-fitted options expand the I/O capabilities of the MintDrive
II
and provide CAN bus,
DeviceNet or Profibus connectivity. See Appendix A for details about options. MintDrive
II
will
operate with a large number of brushless servo motors - for information on selecting Baldor
servo motors, please see the sales brochure BR1202 (BR1800 for linear motors) available
from your local Baldor representative.
This manual is intended to guide you through the installation of MintDrive
II
. The sections
should be read in sequence.
The Basic Installation section describes the mechanical installation of the MintDrive
II
, the
power supply connections and motor connections. The other sections require knowledge of
the low level input/output requirements of the installation and an understanding of computer
software installation. If you are not qualified in these areas you should seek assistance before
proceeding.
2
Introduction
2