Azbil MagneW Two-wire PLUS+ MTG15A, User Manual

Page: 150 / 280

6-6
Key
Description
Press key Press SHIFT + key
A
ID
DE READ
ID: Starts communication with the converter.
The display window shows TAG No. of the
converter. It is possible to write or rewrite the
TAG No. on this screen.
Used when the
communication method is
SFN. D. Has the same
function as ID.
B
CONF
CONF: Used to correct the converter or change
the setting of the internal data. This function
has a hierarchical structure. See “Hierarchical
structure of CONFIG functions” on page 6-17
for details.
No effect
C
DAMP
DAMP: Press this key to display or change the
damping time constant of the converter.
No effect
D
UNITS
UNITS: Press this key to display or set the
engineering units of the flow rate measured
using the converter.
No effect
LRV E
0%
LRV 0%: Displays the lower range value of the
converter output range. Fixed at 0.0% in the
converter. The lower range value refers to the
flow rate when the converter output becomes
0% (4 mA DC in the case of analog output).
No effect
URV F
100%
URV 100%: Displays the upper range value of
the converter output range. The upper range
value refers to the flow rate when the converter
output becomes 100% (20 mA DC in the case of
analog output).
No effect
MENU I
ITEM
DE CONF.
MENU ITEM: Used to display or select a
different item located at the same hierarchy and
with the same function.
DE CONF: Used to display
or select variables output in
digital communication using
SFN.D for communication
method.