Azbil MagneW Two-wire PLUS+ MTG15A, User Manual

Page: 175 / 280

6-31
Displaying self-diagnostics result: STAT key
Introduction
It is possible to display the self-diagnostics results of the converter sequentially from the SFC.
This key is useful when used in combination with Action printout (page 6-31).
Procedure
Use the following procedure to be able to display the self-diagnostics results.
Step Key Procedure SFC screen
1
CLR
( No )
Make sure that the SFC is set to
“READY”.
If it is not, press the
CLR
( No )
key to set it
to “READY”.
SFCM00006009D
2
U
STAT
F/S DIR
Press the
U
STAT
F/S DIR
key.
Result:
„
When no error has occurred, the
message shown here to the right
appears.
„
If a minor fault has occurred,
“#“appears at the end of the bottom
line of the SFC display window.
SFCM00006006D
SFCM00006013D
SFCM00006014D
4
CLR
( No )
After checking the self-diagnostics
results, press the
CLR
( No )
key to return
to step 1.