Azbil MagneW Two-wire PLUS+ MTG15A, User Manual

Page: 152 / 280

6-8
Key names and functions
This section describes the functions assigned to the yellow keys which are used to enter
numerals.
Key
Description
Press key Press SHIFT + key
P
9
PRINT
9: Enters numeral 9. PRINT: Prints out internal data of the converter. This
printing operation is called “configuration printout”.
O
8
FEED
8: Enters numeral 8. FEED: Advances printing paper by 1 line. The display
window shows “PRINTER FEED”. As long as this
prompt is displayed, each pressing of this key
advances paper by 1 line. To cancel this operation,
press the CLR key.
N
7
to
R
4
7 to 4: Enters numeral
7 to 4.
No effect
X
3
SW VER
3: Enters numeral 3. Displays the software versions of the converter and
SFC. If the SFC is not communicating with the
converter, only the version of the SFC is shown.
W
2
2: Enters numeral 2. Displays “KEYBAORD TEST row* column*” and
then displays the row and column of the key pressed
immediately after. Used to check the keyboard for
any problems.
V
1
1: Enters numeral 1. No effect
Z
0
ACT PR
0: Enters numeral 0. ACT PR: Prints out a response from the converter
every time the key is operated. This operation is
called “action printout”.
SCR PAD

: Enters a decimal
point.
SCR PAD: Writes a memo into the database of the
converter.
TIME
Inverts the sign in the
case of numerical
input.
TIME: Displays the current year, month, day and
time.