Azbil MagneW Two-wire PLUS+ MTG15A, User Manual

Page: 106 / 280

5-36
Item Contents Screen
PLS WID Sets the output pulse width.
20.0 %
# PLS
0010 ms
10.000 Hz
WID
DROP OUT Sets drop out.
20.0 %
# DROPOUT
10 %
LOW FLOW CUT Sets low flow cut.
20.0 %
# LOW FLOW CUT
10 %
HI-ALM/LOW-ALM Sets upper/lower limit alarm.
20.0 %
# HI-AIM
LO-AIM
0 %
100 %
ERROR OUT MODE
I. OUT
Determines the analog output
failsafe direction.
20.0 %
# ERROR OUT MODE
I.OUT HOLD
ERROR OUT MODE
P. OUT
Determines the pulse output
failsafe direction.
20.0 %
# ERROR OUT MODE
P.OUT HOLD
ST. OUT MODE Sets a contact output status.
20.0 %
# ST. OUTMODE
NORMAL CLOSE
Note) After the MODE key is pressed, configured data in the ENGINEERING MODE are saved
in non-volatile memory. When configure data, be sure to press the MODE key to save the
data.