manualshive.com logo in svg

Axis 7100, User Manual, Page: 89 / 181

Share
Download
Axis 7100 User Manual Download Page 89

 

AXIS 7100

 

User’s Manual

Using the AXIS 7100

 

89 

Raw TCP printing support means that you can distribute your 

document images across network segments to any TCP/IP printer 

connected on a local or remote network.

Send-to-RightFax

This allows document images to be distributed to a RightFax 

server defined in the AXIS 7100 destination list using either e-
mail (SMPT) or LPD as the data transfer method. For more 

information on RightFax destinations, please refer to “

RightFax 

Integration with SMTP

”  on page 70 or “

RightFax Integration 

with LPD

”  on page 71.

Authentication

If the administrator has enabled authentication the user must 

enter a user name and password to gain access to the AXIS 
7100. If the authentication process is not enabled, proceed to the 

next section“

Sending to Destinations

”  on page 91. 

1.

When the following display appears, enter your user name 

and press 

Menu

 (on the control panel) or 

Tab

 (on the 

keyboard).

2.

Enter your password and press 

Menu

 (on the control panel) or

press 

Tab

 (on the keyboard):

3.

If NT Authentication is enabled, the following prompt will 
appear:

User Name:

Password:

Domain:
Default

Summary of Contents for 7100






















































































































































































Reviews:

No comments