Axis 7100 User Manual Download Page 52

Page: 52 / 181

Configuring the AXIS 7100

AXIS 7100 User’s Manual

From the

Protocols

dialog, click the

External Address Book

tag.

Your options are:

•

No External Address Book

- Select this option if you do not

want to retrieve an External Address Book.

•

External Address Book via LDAP

(e-mail destinations only) -

Select this option to retrieve an external address book from an
LDAP (Lightweight Directory Access Protocol) server. For more
information on LDAP, see “

LDAP

” on page 146. Check the AXIS

7100 Support Web for more information on the settings for your
specific LDAP server.

LDAP Server -

Specify the name or IP Address of the LDAP server.

Port Number -

Specify the number of the TCP/IP port.

User -

Specify the name for logging on to the LDAP server, e.g.

cn=name, o=companyname, c=countrycode.

If left blank, no

authorization will be attempted. If the contents in this field does
not include

a "="

or a comma, the string

"cn="

is automatically

added to the beginning of the contents.

Password -

Specify the password for logging on to the LDAP

server. If the User field is left blank, this setting will be ignored.

Confirm -

Confirm the password to make sure it was spelled

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 52 / 181

Search results

Summary of Contents for 7100

Reviews: