Axis 7100 User Manual Download Page 152

Page: 152 / 181

Meta Information DTD

AXIS 7100 User’s Manual

152

<!ENTITY MD_DOMAIN "XML meta data">

<!-- ========================================

ELEMENT:MetaDataFile

PARENT:None

CHILD:AlwaysAsk (optional)

Ask

(zero or more)

ATTRIBUTES:None

DESCRIPTION:This element is the root element. It

allows the Administrator to define meta data that

will always be requested (gathered in the

"AlwaysAsk" section) regardless of the destination,

and meta data that will be requested only when a

particular destination is selected (gathered in the

"Ask"section).

============================================= -->

<!ELEMENT MetaDataFile (AlwaysAsk?, Ask*)>

<!ATTLIST MetaDataFile

Version CDATA #FIXED "&MD_DTD_VERSION;"

Domain

CDATA #FIXED "&MD_DOMAIN;">

<!-- ========================================

PARENT:MetaDataFile

CHILD:MetaData (one or more)

Output (optional)

ATTRIBUTES:None

DESCRIPTION:This element gathers the meta data that

is requested from the user regardless of the

destination. This does not imply that the different

meta data is required but just that it is not

destination dependent as the meta data gathered in

the "Ask" section is. For instance the Administrator

can always ask the User to identify himself. This is

not destination

dependent.=================================== -->

<!ELEMENT AlwaysAsk (M, Output?)>

<!-- ========================================

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 152 / 181

Search results

Summary of Contents for 7100

Reviews: