manualshive.com logo in svg

Axis 7100, User Manual, Page: 138 / 181

Share
Download
Axis 7100 User Manual Download Page 138

 

Meta Information

 

AXIS 7100 User’s Manual

138

More Information

For more information on the Meta Information functionality and 
for more XML DD file examples, please refer to the White papers 

in the AXIS 7100 Developer section at http://www.axis.com

INT_NUMBER_OF_PAGES

Specifies the number of pages of the image 
file.

INT_WIDTH

Specifies the width of the image file.

INT_HEIGHT

Specifies the height of the image file.

INT_X_RESOLUTION

Specifies the horizontal resolution of the im-
age file.

INT_Y_RESOLUTION

Specifies the vertical resolution of the image 
file.

INT_BITS_PER_PIXEL

Specifies the number of bits per pixel of the 
image file.

INT_DATA_TYPE

Specifies the data type of the image file.

INT_PAPER_ORIENTATION

Specifies the paper orientation of the image 
file.

INT_FORMAT

Specifies the format of the image file.

INT_DOUBLE_SIDED

Specifies the orientation of the image file.

INT_INTENSITY

Specifies the intensity of the image file.

INT_CONTRAST

Specifies the contrast of the image file.

INT_DESTINATION

Specifies the destination description that orig-
inated the image file.

INT_SUBJECT

Specifies the selected subject.

INT_USER_MAIL

Specifies the e-mail address of the user.

INT_USER_ID

Specifies the description of the user.

INT_MAC_ADDRESS

Specifies the MAC address of the Axis Network 
Document Server that produced the image file.

INT_LAST_RESET_DATE

The date when the counter was last reset

INT_COUNTER_LAST_RESET

The counter at the time of the last reset

INT_COUNTER_TOTAL

The counter total (cannot be reset)

Summary of Contents for 7100






















































































































































































Reviews:

No comments