Axis 7100 User Manual Download Page 171

Page: 171 / 181

AXIS 7100

User’s Manual

Technical Specifications

171

Appendix F Technical Specifications

Supported Systems

Any system supporting TCP/IP, LPD (Line Printer Daemon),

HTTP (Hypertext Transfer Protocol) and optionally FTP (File

Transfer Protocol) and SMTP (Simple Mail Transfer Protocol)

Supported

Web Browsers

•

Netscape Navigator 4.0 or higher

•

Microsoft Internet Explorer 4.0 or higher

•

HTTP 1.0+ and HTML 3.0+ compatible web browsers

Supported Mail

Servers

•

Microsoft Exchange

•

Sendmail

•

Lotus Notes

•

Novell Groupwise

•

Compatible SMTP mail servers

Supported Fax Server

•

RightFax 7.0 or higher

Supported LDAP

Server Software

•

Microsoft Exchange 5.x, 2000

•

Lotus cc:Mail

•

Novell GroupWise

•

OpenLDAP

Supported Protocols

HTTP, IP, FTP, SMTP, TCP, LPD, Raw TCP/IP SLP, ARP, RARP,

BOOTP, DHCP, ICMP, SNMP, LDAP, WINS, UDP, NTP, CFP

Supported Printers

PCL printers
TCP/IP printing over Raw TCP or LPD supported.

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 171 / 181

Search results

Summary of Contents for 7100

Reviews: