Axis 7100 User Manual Download Page 163

Page: 163 / 181

AXIS 7100

User’s Manual

The Parameter List

163

Retrieve Method

= None

Specifies from where the address book will be
retrieved.

None

FTP

LDAP

FTP Server

Specifies the name or IP address of the FTP
server.

FTP User

Specifies the user name for logging on to the
FTP server. If left blank, the FTPDefaultUser will
be used.

FTP Password

Specifies the password for logging on to the
FTP server. If left blank, the
FTPDefaultPassword will be used.

FTP Directory

Specifies the directory on the FTP server where
the file is stored.

FTP File Name

Specifies the name of the file on the FTP server.

LDAP Server

Specifies the name or IP address of the LDAP
server.

LDAP Port

=389

Specifies the number of the TCP/IP port.

LDAP User

Specify the name for logging on to the LDAP
server, e.g.cn=name, o=company name,
c=country code. If left blank no authorization
will be attempted.

LDAP Password

Specify the password for logging on to the
LDAP server. If the User Field is left blank, this
setting will be ignored.

LDAP Search Base

Specifies where to begin the search, e.g.

o=companyname, c=countrycode

LDAP Name Field

= cn

Specifies the name of the field that contains the
destination name.

LDAP Mail Field

= mail

Specifies the name of the field that contains the
e-mail address.

LDAP Filter

Specifies an LDAP filter to reduce the length of
the destination list, e.g.

(givenName=*)

LDAP Reload Interval

=12

Specifies how often the external addresses are
to be reloaded. The value is specified in whole
hours and the default value is 12 hours.

[SMTP]
Primary Mail Server

=mail

Specifies the name or IP address of the SMTP
mail server that provides the e-mail facilities for
the AXIS 7100. If you are using DNS, specify the
name. Otherwise, specify the IP address. E.g.

mail

mail.domain.com

192.36.253.80

Parameter name

Value

Description

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 163 / 181

Search results

Summary of Contents for 7100

Reviews: