Axis 7100, User Manual, Page: 57 / 181

AXIS 7100 User’s Manual Configuring the AXIS 7100
57
2.
In the
Time before logout
field, specify the number of seconds
that the AXIS 7100 is to wait for user input before
automatically logging out the authenticated user.
3. Check the Authenticated only when e-mail address is
retrieved
checkbox if the user is not to be authenticated when
the AXIS 7100 fails to retrieve the matching e-mail address
from the authentication server.
Note:
4.
Click
Apply
to save your changes, then click
OK
to return to
the This AXIS 7100 page.
If you want to return to the This AXIS 7100 page without
saving your changes click Cancel.
LDAP Server
Authentication
Note:
NT Authentication can only search for the name corresponding to the
username and cannot retrieve the e-mail address itself. The e-mail
address matching the name is retrieved from the resident destinations
list.
Parameter Description
LDAP Server Specify the name or IP Address of the LDAP server
Port Number Specify the number of the TCP/IP port used by the LDAP
server
Search Base Specify where to begin the search, e.g. o=company name,
c=country code
Name Field Specify the name of the field that contains the destination
name,
e.g.
cn
E-mail Field Specify the name of the field that contains the e-mail address,
e.g.
mail
User ID Field
Specify the User ID field that contains the user ID/user name of
the user to be authenticated, e.g.
uid
The settings may differ depending on the LDAP server. Refer to the user
documentation of the LDAP server for more information.