Axis 7100 User Manual Download Page 101

Page: 101 / 181

AXIS 7100

User’s Manual

Using the AXIS 7100

101

Note:

Scanning Parameters

From the AXIS 7100 control panel, press

Menu

to scroll

through the scanning menu. Use

to find the desired

value. If a keyboard is connected, press

Tab

and use the

Down

arrow keys to find the desired value or search the

menu by typing the parameter name (or the first letters in the

parameter name).

The table below describes the available parameters for each

destination type:

Note:

If the file name already exists a sequence number will be added to the
file name if the

Append sequence number to file name

option under

admin|Destinations|File Destination New>>

has been selected. If this

option has not been selected, the old file will be replaced.

Parameter

Destination Type

Comment

E-mail /URL

FTP

Printer

Send to

yes

Sent by

yes

If enabled by the
administrator.

Note: Always disabled
using Authentication.

Subject

yes

If enabled by the
administrator

Enter file name

yes

If enabled by the
administrator

Number of copies

yes

Profile

yes

Paper size

yes

If you do not specify anything, the default settings will be used.

Summary of Contents for 7100






















































































































































































Search results

Summary of Contents for 7100

Reviews:

Axis 7100, User Manual, Page: 101 / 181

Search results

Summary of Contents for 7100

Reviews: