AXIS 7100
User’s Manual
Basic Installation
31
2.
If necessary, update your host table and alias name databases
as required by your system.
3.
Start the RARP daemon, if it is not already running. This is
typically performed using the command
rarpd -a
4.
Restart the AXIS 7100 to download the IP address.
Note:
Using BOOTP
in UNIX
Follow these steps to download the IP address using the BOOTP
method:
1.
Append the following entry to your boot table. This is
typically performed by editing the file
/etc/bootptab
.
where:
Example:
2.
If necessary, update your host table and alias name databases
as required by your system.
RARP is enabled by default but can be disabled by an Administrator using
the System Settings page.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<Internet address>:\
:sm=<subnet mask>:gw=<gateway field>
ht
ether
for Ethernet
vm
rfc1048
ha
The Ethernet or node address, i.e. the AXIS 7100 serial number
ip
The IP address of the AXIS 7100
sm
The subnet mask
gw
The default router address
spserv:ht=ether:vm=rfc1048:\
:ha=00408c24c01c:ip=172.16.253.80:\
:sm=255.255.0.0:gw=172.16.253.254