manualshive.com logo in svg

Axis 7100, User Manual, Page: 13 / 181

Share
Download
Axis 7100 User Manual Download Page 13

 

AXIS 7100

 

User’s Manual

Physical Description

 

13

 

The Front Panel

The front panel indicators show the status of the AXIS 7100. The 

function of each indicator is described below.

Status Indicator

The Status indicator flashes during startup and remains lit when 

the AXIS 7100 is ready for use. If the status indicator turns off, 
this may indicate an error.

Busy Indicator

The Busy indicator turns on when the AXIS 7100 is allocated for 
use and remains on during the scanning process.

Network Indicator

The tri-colored Network indicator flashes:

yellow

 - indicating network activity on a 10MB Ethernet 

network.

green

 - indicating network activity on a 100MB Fast Ethernet 

network.

red

 - indicating that the unit is not correctly connected to the 

network.

Power Indicator

The Power indicator is normally lit while power is applied. If the 
indicator remains off or flashes, this indicates a problem with 

the AXIS 7100 or its power supply.

Status
Indicator

Network
Indicator

Power 
Indicator

Busy
Indicator

Summary of Contents for 7100






















































































































































































Reviews:

No comments