manualshive.com logo in svg

Axis 7100, User Manual, Page: 83 / 181

Share
Download
Axis 7100 User Manual Download Page 83

 

AXIS 7100

 

User’s Manual

Configuring the AXIS 7100

 

83

 

Service Page Overview

Total number of pages - 

counts the total number of pages 

scanned and sent using the 

AXIS 7100

. This counter cannot be 

reset.

Counter since last reset - 

counts the number of pages scanned 

since the counter was last reset.

Date of last reset - 

the date the counter was last reset.

1.

Click 

Edit

 to access the pages where you can:

• Change the password
• Specify the e-mail address destination for the counter 

statistics report

• Click the checkbox (default) if the counter is to be 

increased only if the scanning is successful. If the check 

box is empty, all started scanning jobs will be counted

Click 

Apply

 to save your changes without closing the dialog box 

or click 

OK

 to save your changes and close the dialog box.

2.

Click the 

Mail/Print 

button to access the page where you can:

• Click 

SendMailNow

 to send a scan counter report to the 

specified e-mail destination

• Select a printer from the printer drop-down list and click 

PrintNow

 to print a scan counter report to the selected 

printer.

• Click 

Close

 to close the dialog box

3.

Click 

Reset

 to reset the counter

Mail/Print

Scan Counter

To send a scan counter report, go to 

admin | Support

 and click 

the 

Scan Counter

 link. The following dialog will appear: 

Summary of Contents for 7100






















































































































































































Reviews:

No comments