manualshive.com logo in svg

Axis 7100, User Manual, Page: 84 / 181

Share
Download
Axis 7100 User Manual Download Page 84

Configuring the AXIS 7100

 

AXIS 7100 User’s Manual

 

84

 

Do one of the following depending on whether you wish to send 

the report to the specified e-mail destination or to a printer.

• Click 

SendMailNow

 to send the counter report to the 

specified e-mail destination

• Select a printer from the printer drop-down list and click 

PrintNow

Note:

Scan Counter Report

The scan counter report contains the following information:

• General information i.e. date, host name, host address 

and connected scanner

• Counter information i.e. total number of pages scanned, 

number of pages scanned since last reset and date of last 

reset

The e-mail address is set by the authorized service user on the service 
page. See “

Service Page Overview

”  on page 83 for details.

The printers are added from 

Destinations | Printer Destination New>> 

Summary of Contents for 7100






















































































































































































Reviews:

No comments