manualshive.com logo in svg

Axis 7100, User Manual, Page: 60 / 181

Share
Download
Axis 7100 User Manual Download Page 60

Configuring the AXIS 7100

 

AXIS 7100 User’s Manual

 

60

 

Services Overview

The table below provides an overview of the information and services 
provided by each button on this page

Creating and Editing

E-mail Destinations

E-mail destinations allow the users to send scanned images to 

an e-mail address or RightFax server using the SMTP protocol. 

Follow the instructions below to create new or edit existing e-

mail destinations.

1.

Click 

Destinations

.

2.

Previously added e-mail, file and printer destinations are listed 

in the table. Click 

Detailed

 to view the detailed settings.

Button

Description

E-mail Destination New >>

Creates a new e-mail or RightFax destination.

File Destination New >>

Creates a new file destination.

Printer Destination New >>

Creates a new printer or RightFax destination.

URL for E-mail >>

Defines the storage location for images sent as 
hyperlinks to e-mail destinations.

E-mail Subjects >>

Specifies the text to be displayed in the subject 
field when sending to e-mail destinations.

Note: US ASCII characters only.

Destination Defaults >>

Displays the default parameters for each destina-
tion, e.g. the associated profile for a particular 
destination, the transfer type, etc. 

Note: Editing the default settings causes all desti-
nations using the default value to be changed au-
tomatically.

Remove All Destinations

Deletes all destinations from table.

External Destinations

Displays the external destinations. Destinations 
are displayed using the same syntax as an exter-
nal address book stored on an FTP server 
(see Network Settings | Detailed View)

Summary of Contents for 7100






















































































































































































Reviews:

No comments