AXIS 7100
User’s Manual
Configuring the AXIS 7100
81
1.
In a DOS or UNIX window, type
ftp <Internet address>
,
where
<Internet address>
is the name or IP address of
your AXIS 7100.
2.
Login using the user id
root
and the password
pass
.
Note:
3.
Type
get config.ini
to download the configuration file to
your current directory.
4.
Edit the file using your preferred text editor. In Windows 95
and Windows NT environments, you can for example use
Notepad.
Note:
5.
Type
put config.ini
to download the file to the AXIS 7100
and save it permanently.
6.
To exit FTP, type the command
quit
,
bye
, or
exit
.
Notes:
The password might have been changed. This is done by the
Administrator on the
admin | Edit | General
page.
Do not use MS Word or other similar word processor.
• The configuration file can be used as a template when configuring
multiple document servers.
• It is sufficient to download the configuration parameters that have
changed. The other parameter settings will remain unchanged.
• All parameter settings apart from the IP address, Gateway and Subnet
mask can be changed using FTP. Please refer to “
The Parameter List
”
on page 158.
• If you upload the config.ini file the passwords will be represented by
‘*****’. These ***** must be changed to the actual password before
downloading the config.ini file to an AXIS 7100. The passwords can
also be changed via the web interface after downloading the con-
fig.ini file.